Discuss human rights as it relates to the controversy.
hoose from the following topics:
- Psychologists’ involvement in military interrogations
- Psychologists’ involvement in assessments related to death penalty cases
In 1,000-1,250 words, consider the following:
- Discuss human rights as it relates to the controversy.
- Explain ethical implications that may arise for both sides of the controversy.
A minimum of three peer-reviewed sources and the textbook should be used to support this paper.
Prepare this assignment according to the guidelines found in the APA Style Guide,
Part A
When transporting a microscope:
ANSWER:
When transporting a microscope:
| the 100x objective lens should be closest to the stage |
| the condenser should be removed and stored in its compartment |
| use both hands to hold it by the base |
| the cord should be secured |
Lab Manual Unit 4 Post-Lab Quiz Question 3
Part A
The “b” marks the ________.
ANSWER:
The “b” marks the ________.
| ocular lens |
| arm |
| objective lens |
| revolving nosepiece |
Lab Manual Unit 4 Post-Lab Quiz Question 5
Part A
What part of a microscope anchors the objective lens to the head of the microscope?
ANSWER:
What part of a microscope anchors the objective lens to the head of the microscope?
| arm |
| revolving nosepiece |
| base |
| stage |
Lab Manual Unit 4 Pre-Lab Quiz Question 2
Part A
Identify the microscope part labeled by the letter “k.”
ANSWER:
Identify the microscope part labeled by the letter “k.”
| substage light |
| coarse adjustment knob |
| fine adjustment knob |
| iris diaphragm lever |
Lab Manual Unit 4 Pre-Lab Quiz Question 4
Part A
What part of the microscope moves the slide on the stage?
ANSWER:
What part of the microscope moves the slide on the stage?
| aperture |
| iris diaphragm |
| fine adjustment knob |
| mechanical stage control |
Lab Manual Unit 4 Pre-Lab Quiz Question 6
Part A
On what part of the microscope are the objectives lenses located?
ANSWER:
On what part of the microscope are the objectives lenses located?
| base |
| rotating nosepiece |
| stage |
| body tube |
Lab Manual Unit 4 Post-Lab Quiz Question 6
Part A
Which statement best describes what a letter viewed under the microscope would look like.
ANSWER:
Which statement best describes what a letter viewed under the microscope would look like.
| same as with the naked eye |
| upside down, but still left to right |
| upside down and backwards |
| sideways and right to left |
Lab Manual Unit 4 Post-Lab Quiz Question 8
Part A
What is the total magnification when using the oil immersion objective to view a structure?
ANSWER:
What is the total magnification when using the oil immersion objective to view a structure?
| 100x |
| 400x |
| 40x |
| 1000x |
Lab Manual Unit 4 Post-Lab Quiz Question 10
Part A
As total magnification increases, the working distance ________.
ANSWER:
As total magnification increases, the working distance ________.
| increases |
| decreases |
| stays the same |
| is not affected by the total magnification |
Lab Manual Unit 4 Pre-Lab Quiz Question 8
Part A
What part of the microscope will allow the maximum amount of light to pass through the slide?
ANSWER:
What part of the microscope will allow the maximum amount of light to pass through the slide?
| condenser |
| fine adjustment knob |
| iris diaphragm |
| substage light |
Lab Manual Unit 4 Pre-Lab Quiz Question 10
Part A
Convert 4 mm into μm.
ANSWER:
Convert 4 mm into μm.
| 0.04 |
| 400 |
| 4000 |
| 0.004 |
Lab Manual Unit 4 Pre-Lab Quiz Question 12
Part A
An object extends halfway across the field of view. The field diameter for the oil immersion objective is 0.2 mm. Estimate the size of the object in micrometers.
ANSWER:
An object extends halfway across the field of view. The field diameter for the oil immersion objective is 0.2 mm. Estimate the size of the object in micrometers.
| 100 μm |
| 0.01 μm |
| 10 μm |
| 0.1 μm |
Lab Manual Unit 4 Post-Lab Quiz Question 11
Part A
Convert 245 μm into mm.
ANSWER:
Convert 245 μm into mm.
| 0.0245 mm |
| 245,000 mm |
| 0.245 mm |
| 2.45 mm |
Lab Manual Unit 4 Post-Lab Quiz Question 13
Part A
The field diameter for the low-powered objective is ________ the field diameter for the scanning objective lens.
ANSWER:
The field diameter for the low-powered objective is ________ the field diameter for the scanning objective lens.
| greater than |
| equal to |
| less than |
Lab Manual Unit 4 Post-Lab Quiz Question 15
Part A
The field diameter for the 4x objective on a specific microscope is 4.0 mm. What will the field diameter be for the 10x objective?
ANSWER:
The field diameter for the 4x objective on a specific microscope is 4.0 mm. What will the field diameter be for the 10x objective?
| 1.6 mm |
| 10 mm |
| 2 mm |
| 40 mm |
Lab Manual Unit 4 Post-Lab Quiz Question 17
Part A
What is the depth of field?
ANSWER:
What is the depth of field?
| the thickness of the specimen that is in sharp focus |
| how easily focused the specimen is between two different magnifications |
| the length of the specimen when viewed with the scanning objective lens |
| how wide the view is through the lens |
Lab Manual Unit 4 Pre-Lab Quiz Question 14
Part A
What is depth of field?
ANSWER:
What is depth of field?
| another term for field diameter |
| distance between the slide and the objective lens |
| distance between the ocular and objective lenses |
| thickness of a specimen when in focus |
Lab Manual Unit 4 Pre-Lab Quiz Question 16
Part A
When transporting the microscope one hand should support the ________ and the other should support the ________.
ANSWER:
When transporting the microscope one hand should support the ________ and the other should support the ________.
| head; base |
| condenser; stage |
| stage; arm |
| arm; base |
Lab Manual Unit 4 Post-Lab Quiz Question 18
Part A
If you decrease the total magnification, the depth of the field ________.
ANSWER:
If you decrease the total magnification, the depth of the field ________.
| stay the same |
| decreases |
| increases |
Lab Manual Unit 4 Post-Lab Quiz Question 19
Part A
You should use lens paper and ________ to the clean the lenses.
ANSWER:
You should use lens paper and ________ to the clean the lenses.
| disinfectant |
| water |
| lens cleaner |
| oil |
Lab Manual Unit 4 Post-Lab Quiz Question 20
Part A
You should allow the microscope to cool before storing it because:
ANSWER:
You should allow the microscope to cool before storing it because:
| It will prevent the motor from burning out. |
| It is easier to clean when cool. |
| It will extend the life of the expensive bulb. |
| Its motor and light are warm and a student could get injured. |