Discuss human rights as it relates to the controversy.

hoose from the following topics:

  1. Psychologists’ involvement in military interrogations
  2. Psychologists’ involvement in assessments related to death penalty cases

In 1,000-1,250 words, consider the following:

  1. Discuss human rights as it relates to the controversy.
  2. Explain ethical implications that may arise for both sides of the controversy.

A minimum of three peer-reviewed sources and the textbook should be used to support this paper.

Prepare this assignment according to the guidelines found in the APA Style Guide,

Part A

When transporting a microscope:

ANSWER:

When transporting a microscope:

the 100x objective lens should be closest to the stage
the condenser should be removed and stored in its compartment
use both hands to hold it by the base
the cord should be secured

Lab Manual Unit 4 Post-Lab Quiz Question 3

Part A


The “b” marks the ________.

ANSWER:


The “b” marks the ________.

ocular lens
arm
objective lens
revolving nosepiece

Lab Manual Unit 4 Post-Lab Quiz Question 5

Part A

What part of a microscope anchors the objective lens to the head of the microscope?

ANSWER:

What part of a microscope anchors the objective lens to the head of the microscope?

arm
revolving nosepiece
base
stage

Lab Manual Unit 4 Pre-Lab Quiz Question 2

Part A


Identify the microscope part labeled by the letter “k.”

ANSWER:


Identify the microscope part labeled by the letter “k.”

substage light
coarse adjustment knob
fine adjustment knob
iris diaphragm lever

Lab Manual Unit 4 Pre-Lab Quiz Question 4

Part A

What part of the microscope moves the slide on the stage?

ANSWER:

What part of the microscope moves the slide on the stage?

aperture
iris diaphragm
fine adjustment knob
mechanical stage control

Lab Manual Unit 4 Pre-Lab Quiz Question 6

Part A

On what part of the microscope are the objectives lenses located?

ANSWER:

On what part of the microscope are the objectives lenses located?

base
rotating nosepiece
stage
body tube

Lab Manual Unit 4 Post-Lab Quiz Question 6

Part A

Which statement best describes what a letter viewed under the microscope would look like.

ANSWER:

Which statement best describes what a letter viewed under the microscope would look like.

same as with the naked eye
upside down, but still left to right
upside down and backwards
sideways and right to left

Lab Manual Unit 4 Post-Lab Quiz Question 8

Part A

What is the total magnification when using the oil immersion objective to view a structure?

ANSWER:

What is the total magnification when using the oil immersion objective to view a structure?

100x
400x
40x
1000x

Lab Manual Unit 4 Post-Lab Quiz Question 10

Part A

As total magnification increases, the working distance ________.

ANSWER:

As total magnification increases, the working distance ________.

increases
decreases
stays the same
is not affected by the total magnification

Lab Manual Unit 4 Pre-Lab Quiz Question 8

Part A

What part of the microscope will allow the maximum amount of light to pass through the slide?

ANSWER:

What part of the microscope will allow the maximum amount of light to pass through the slide?

condenser
fine adjustment knob
iris diaphragm
substage light

Lab Manual Unit 4 Pre-Lab Quiz Question 10

Part A

Convert 4 mm into μm.

ANSWER:

Convert 4 mm into μm.

0.04
400
4000
0.004

Lab Manual Unit 4 Pre-Lab Quiz Question 12

Part A

An object extends halfway across the field of view. The field diameter for the oil immersion objective is 0.2 mm. Estimate the size of the object in micrometers.

ANSWER:

An object extends halfway across the field of view. The field diameter for the oil immersion objective is 0.2 mm. Estimate the size of the object in micrometers.

100 μm
0.01 μm
10 μm
0.1 μm

Lab Manual Unit 4 Post-Lab Quiz Question 11

Part A

Convert 245 μm into mm.

ANSWER:

Convert 245 μm into mm.

0.0245 mm
245,000 mm
0.245 mm
2.45 mm

Lab Manual Unit 4 Post-Lab Quiz Question 13

Part A

The field diameter for the low-powered objective is ________ the field diameter for the scanning objective lens.

ANSWER:

The field diameter for the low-powered objective is ________ the field diameter for the scanning objective lens.

greater than
equal to
less than

Lab Manual Unit 4 Post-Lab Quiz Question 15

Part A

The field diameter for the 4x objective on a specific microscope is 4.0 mm. What will the field diameter be for the 10x objective?

ANSWER:

The field diameter for the 4x objective on a specific microscope is 4.0 mm. What will the field diameter be for the 10x objective?

1.6 mm
10 mm
2 mm
40 mm

Lab Manual Unit 4 Post-Lab Quiz Question 17

Part A

What is the depth of field?

ANSWER:

What is the depth of field?

the thickness of the specimen that is in sharp focus
how easily focused the specimen is between two different magnifications
the length of the specimen when viewed with the scanning objective lens
how wide the view is through the lens

Lab Manual Unit 4 Pre-Lab Quiz Question 14

Part A

What is depth of field?

ANSWER:

What is depth of field?

another term for field diameter
distance between the slide and the objective lens
distance between the ocular and objective lenses
thickness of a specimen when in focus

Lab Manual Unit 4 Pre-Lab Quiz Question 16

Part A

When transporting the microscope one hand should support the ________ and the other should support the ________.

ANSWER:

When transporting the microscope one hand should support the ________ and the other should support the ________.

head; base
condenser; stage
stage; arm
arm; base

Lab Manual Unit 4 Post-Lab Quiz Question 18

Part A

If you decrease the total magnification, the depth of the field ________.

ANSWER:

If you decrease the total magnification, the depth of the field ________.

stay the same
decreases
increases

Lab Manual Unit 4 Post-Lab Quiz Question 19

Part A

You should use lens paper and ________ to the clean the lenses.

ANSWER:

You should use lens paper and ________ to the clean the lenses.

disinfectant
water
lens cleaner
oil

Lab Manual Unit 4 Post-Lab Quiz Question 20

Part A

You should allow the microscope to cool before storing it because:

ANSWER:

You should allow the microscope to cool before storing it because:

It will prevent the motor from burning out.
It is easier to clean when cool.
It will extend the life of the expensive bulb.
Its motor and light are warm and a student could get injured.

“Get 15% discount on your first 3 orders with us”
Use the following coupon
FIRST15

Order Now